14’  X  7.5’  X  4”
OVER ALL  14’7”  X  8’3”  X  4 “
GRANICOAT   (CORIAN)

$14999.00
TOTALLY SELF CONTAINED

What you get...

2   4HP Two speed pumps drive 4 swim jets
42   Stainless Steel Luxury spa jets zone valves
    Rotate the valves to divert from swimjets to the 42 spa jets
4   Swim Jets
2   Air controls for the swim jets
1   Circ pump ( 24/7 filtration and ozonation)
1   Blower, to turbo charge the 42 spa jets
2   L.E.D. Mood light display
1   Balboa control head 6KW / 220 volt
2   Top side control pads ( one at each end )
1   Ozone generator
2   Top load filters (total 70 ft)
2   Spa covers
1   Cover lift
18”   High spa cabinet to deck to, 30” can be buried
    50 amp GFCI breaker and box already mounted with
    50' S.O. cord with plug and receptacle included
1   Delivery to the back yard, owner provides access
6   FOG / MIST nozzles to cool bathers
1   Exercise rail
 

 

What you don’t see

 

The siding can be just about anything, CPI synthetic wood siding, stucco, rock texture and so on…

The spa is totally plug and play, provided you have the receptacle (included) installed by an electrician to 4 wire 50 amp service. The spa is already equipped with a 50’ heavy duty cord and a 50 AMP 240 volt GFCI.

The cabinet is 18” high on the outside the top rails are cedar and the frame is pressure treated. The cabinet must remain above the deck in order to access the enclosed equipment,  Leaving 30 inches that can be below the deck, so typically all you see is the 18” high cabinet portion of the spa.

The operation and care is all done from topside, all valves, controls timers, filters and baskets are in plain view and accessible from the spas edge. There is nothing the spa owner can do underneath the cabinet,

The jets are the most common and will always be available, which is a big problem with most of the proprietary spas. The same goes for the control system, pumps, blowers, lights, ozone, filters, valves, plumbing and fixtures.

There are two large jet pumps; both are two speed (a great feature). Each pump can be totally controlled from in or out of the spa, you can turn on one or the other or both, high speed or low speed. The zone valves can be turned to direct all or part of the water to either the swim jets or the therapy jets or split thru all at the same time (that’s a neat feature).

The spa is plumbed to the antientrapment codes. No one pump has it’s own suction line. All suction lines are shared and all suction fittings are 3.5 ft apart.